Thermal camera maintenance methods and precautions

The thermal camera will be subject to certain wear and tear during use, and these problems will cause the performance of the thermal camera to decrease. Therefore, the daily maintenance of the thermal camera is necessary. It not only reduces the generation of dirt and wear but also effectively increases the service life of the thermal camera. Next, let us learn more about the maintenance methods and precautions of thermal cameras. Here are some answers.

Here is the content list:

Maintenance method.

Maintenance Precautions.

Maintenance method.

To avoid damage to the thermal camera, first use compressed air to remove large particles of dust attached to the inside and outside of the thermal camera, and then wipe it off with a clean, soft cloth. When cleaning the camera lens, gently wipe the lens with a soft cotton cloth dampened with a little non-corrosive solution or a mild diluted soap solution. When cleaning the thermal camera body, use a clean, slightly damp cotton cloth to gently wipe, if necessary, soak the cloth with a solution of water and a small amount of mild soap before wiping. When the use is completed, the thermal camera should be covered with the lens cover as soon as possible, and stored in the carrying case to avoid dust. After the thermal camera has been used for a certain number of years, it needs to be calibrated. Generally, it needs to be calibrated in about 2 years under normal use.

Maintenance Precautions.

In the process of maintaining the thermal camera, pay attention to the following points. First, do not use too much force when wiping the thermal camera to avoid damage to the thermal camera. Second, when wiping the lens of the thermal camera, it is forbidden to completely immerse the cotton cloth in the liquid. The lens is the information transmission window, and the maintenance of the lens is very important. Third, when wiping the camera body, be careful not to use strong acid or strong alkaline detergent for cleaning. Also, remember not to place the thermal camera in a cool and humid place. Fourth, to avoid damage to the thermal camera, it is necessary to ensure that the working environment does not exceed the working tolerance limit of the thermal camera equipment.

Our official website is http://www.argustecn.com/. If you are engaged in a related occupation, are interested in our thermal camera products, want to know more product information, or have any other needs, please contact us. We have a complete inspection and testing equipment, processing equipment, and production lines for lenses, sensors, devices, modules, and application products. We have 229 employees, of which R&D personnel accounts for 45%. Our sales performance has maintained a growth rate of more than 30%. Our products are exported to more than 150 countries for their excellent performance, reliable quality, and thoughtful after-sales service, and are widely praised by users all over the world. We believe that our cost-effective products will also make you satisfied.